An address based data packet network capable of high speeds (10/100/1,000Mbs) originally developed for the computer industry that is seeing adoption in the marine industry. Ethernet networks are designed as a star topology. Systems of three or more nodes require a hub, router or switch to facilitate all point to point connections. An NMEA standard for the transfer of NMEA 2000 messages using an Ethernet protocol is being developed that will be called OneNet.
There are numerous cabling systems for Ethernet but the ones applicable to Raymarine installations include:
Cat5 w/ RJ45
The standard cable/connector of the computer industry that is very low cost but alternatives such as SeaTalkHS and RayNet are preferred connectors in the marine environment.
SeaTalkHS
Raymarine’s first generation Ethernet connector which consisted of putting a waterproof collar around an RJ45 connector.
RayNet
Raymarine’s current generation system that replaces the RJ45 connector with a waterproof vibration tolerant twist pin connector that is designed for the marine environment.
WiFi
A wireless system that doesn’t use any wires that provides for low cost flexible installations but are not as robust as wired systems. WiFi is ideal for non-mission critical accessory connections.
Available cables:
The new RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This network cable is 15-inches (400mm) long.
This cable joins our existing line of RayNet interconnect cables available in 400mm, 2, 5, 10 or 20 metre lengths.
![]() |
|||||
RAYNET TO RAYNET CABLES | |||||
Part Number | A80161 | A62361 | A80005 | A62362 | A80006 |
Product | Cable | ||||
Product Compatibillity | RayNet to RayNet Port Connectivity | ||||
Data | Ethernet | ||||
Length | 400mm | 2m | 5m | 10m | 20m |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
RAYNET ADAPTOR CABLES | ||||||
Part Number | A62360 | A80151 | A80159 | A80513 | A80247 | A80262 |
Product | RayNet (F) to RJ45 (M) Port | RayNet male to RJ45 adaptor cable | RayNet (F) to RJ45 (F) Adaptor | RayNet (Male to Female) Right Angle Adaptor | ||
Product Description | More Info | More Info | More Info | More Info | More Info | |
Data | Ethernet | |||||
Length | 1m | 3m | 10m | 100mm | 100mm | N/A |
![]() |
![]() |
![]() |
![]() |
![]() |
|
RAYNET ADAPTOR CABLES | |||||
Part Number | A80160 | A80276 | A80272 | A80162 | R70014 |
Product | RayNet (F) to SThs (F) Socket Adaptor Cable | RayNet (F) to SThs (M) Socket Adaptor Cable | RayNet (M) Pins to SThs (M) Socket Adaptor Cable | RayNet (M) Pins to RayNet (M) Pins Cable Joiner | RayNet Cable Puller (5 pack) |
Product Description | More Info | More Info | More Info | More Info | More Info |
Data | Ethernet | N/A | |||
Length | 400mm | 3m | 400mm | 100mm | N/A |
The Raynet (F) to RJ45 Ethernet (M) adapter can be used to connect new a, c, e or gS-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch.
When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a RJ45 radar scanner cable, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.
We are pleased to now offer this cable in 1, 3 or 10-metre lengths.
This has a RayNet Female connector at one end and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight.
A typical use for this cable would be to convert a "RJ45" Digital Radar Cable to a "RayNet" Radar Cable, so you can connect the cable directly into the new HS-5 Network Switch or directly into the back of an a,c,e or gS Series multifunction display.
This 90°, right angle RayNet connector has a RayNet "Male" one end and RayNet "Female" the other.
Ideal for the multifunction displays or the RMK-9 keypad to reduce the usual cable bend radius.
The new Raynet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide, C-Wide and E-Classic* MFDs to new generation RayNet multifunction displays.
*Note: The E-classic requires a "crossover" in the SThs data line, so this cable can only be used when connecting to the HS-5 Network Switch.
The new Raynet (F) to SeaTalkhs (M) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide, C-Wide and E-Classic* MFDs to new generation RayNet multifunction displays.
*Note: The E-classic requires a "crossover" in the SThs data line, so this cable can only be used when connecting to the HS-5 Network Switch.
RayNet (M) to SThs (M)
A typical use for this adaptor cable would be to convert the new "RayNet(F)" Digital Radar cable to the "SThs (M)" connector, so that it can be plugged directly into the back of a legacy multifunction displays (such as an E-Classic* or C/E-Wide display).
*Note: The E-classic requires a "crossover" in the SThs data line, so this cable can only be used when connecting to the HS-5 Network Switch via a suitable length RayNet extension cable.
The new RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run.
The Cable Puller securely attaches to the twist-lock plug on RayNet (F) networking cables and provide a convenient, center-mounted attachment point for your pull string.
The cable puller also protects the connector's internal pins from damage, acts as a fairing to make pulls through tight spaces easier, and prevents crush/bend damage to the cable/connector joint. The cable pullers are reusable, and come in packages of 5 pullers.
![]() |
![]() |
|||||||||
SEATALKhs CABLES | ||||||||||
Part Number | A62245 | A62246 | E55049 | E55050 | E55051 | A62135 | E55052 | |||
Product | Cable | Adaptor Cable | ||||||||
Product Compatibillity | SeaTalkhs to SeaTalkhs | SeaTalkhs to RJ45 | ||||||||
Data | Ethernet | |||||||||
Length | 1.5m | 15m | 1.5m | 5m | 10m | 15m | 20m |
![]() |
![]() |
|||||||||
RJ45 PATCH CABLES | ||||||||||
Part Number | E06054 | E06055 | E06056 | A62136 | E06057 | R32140 | ||||
Product | Cable | |||||||||
Product Compatibillity | RJ45 to RJ45 Port | J45 to RJ45 Power over Ethernet Cable for T-Series PoE/JCU | ||||||||
Data | Ethernet | |||||||||
Length | 1.5m | 5m | 10m | 15m | 20m | 7.62m (25ft) |
![]() |
![]() |
![]() |
![]() |
|
ETHERNET SWITCHES AND ACCESSORIES | ||||
Part Number | E55060 | A80007 | R32142 | R32141 |
Product | Accessory | Product | Accessory | Product |
Product Compatibillity | RJ45 to RJ45 Crossover Coupler | HS5 RayNet Network Switch - 5 ports | RJ45 to RJ45 Waterproof Coupler (Supplied with the Thermal Cameras) | Power over Ethernet Injector. Thermal Cameras |
Data | Ethernet |
All the Digital Radar cables are listed below. We have the new "RayNet" Radar Cables, followed by the selection of available extension cables.
Finally we have the older "RJ45" radar cables, for those who need to interface to an RJ45 network switch or crossover coupler (etc).
![]() |
![]() |
![]() |
||||||||||
DIGTAL RADAR CABLES | ||||||||||||
Part Number | A80227 | A80228 | A80229 | A80230 | A92141D | A55080D | A55081D | A55076D | A55077D | A55078D | A55079D | |
Product | Radar Cable (RayNet) | Radar Extension Cable One Male and One Female radar connector on each end |
Radar Cable (RJ45) | |||||||||
Data | Ethernet & Power | |||||||||||
Length | 5m | 10m | 15m | 25m | 2.5m | 5m | 10m | 5m | 10m | 15m | 25m |
The new RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This network cable is 15-inches (400mm) long.
This cable joins our existing line of RayNet interconnect cables available in 400mm, 2, 5, 10 or 20 metre lengths.
![]() |
|||||
RAYNET TO RAYNET CABLES | |||||
Part Number | A80161 | A62361 | A80005 | A62362 | A80006 |
Product | Cable | ||||
Product Compatibillity | RayNet to RayNet Port Connectivity | ||||
Data | Ethernet | ||||
Length | 400mm | 2m | 5m | 10m | 20m |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
RAYNET ADAPTOR CABLES | ||||||
Part Number | A62360 | A80151 | A80159 | A80513 | A80247 | A80262 |
Product | RayNet (F) to RJ45 (M) Port | RayNet male to RJ45 adaptor cable | RayNet (F) to RJ45 (F) Adaptor | RayNet (Male to Female) Right Angle Adaptor | ||
Product Description | More Info | More Info | More Info | More Info | More Info | |
Data | Ethernet | |||||
Length | 1m | 3m | 10m | 100mm | 100mm | N/A |
![]() |
![]() |
![]() |
![]() |
![]() |
|
RAYNET ADAPTOR CABLES | |||||
Part Number | A80160 | A80276 | A80272 | A80162 | R70014 |
Product | RayNet (F) to SThs (F) Socket Adaptor Cable | RayNet (F) to SThs (M) Socket Adaptor Cable | RayNet (M) Pins to SThs (M) Socket Adaptor Cable | RayNet (M) Pins to RayNet (M) Pins Cable Joiner | RayNet Cable Puller (5 pack) |
Product Description | More Info | More Info | More Info | More Info | More Info |
Data | Ethernet | N/A | |||
Length | 400mm | 3m | 400mm | 100mm | N/A |
The Raynet (F) to RJ45 Ethernet (M) adapter can be used to connect new a, c, e or gS-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch.
When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a RJ45 radar scanner cable, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.
We are pleased to now offer this cable in 1, 3 or 10-metre lengths.
This has a RayNet Female connector at one end and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight.
A typical use for this cable would be to convert a "RJ45" Digital Radar Cable to a "RayNet" Radar Cable, so you can connect the cable directly into the new HS-5 Network Switch or directly into the back of an a,c,e or gS Series multifunction display.
This 90°, right angle RayNet connector has a RayNet "Male" one end and RayNet "Female" the other.
Ideal for the multifunction displays or the RMK-9 keypad to reduce the usual cable bend radius.
The new Raynet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide, C-Wide and E-Classic* MFDs to new generation RayNet multifunction displays.
*Note: The E-classic requires a "crossover" in the SThs data line, so this cable can only be used when connecting to the HS-5 Network Switch.
The new Raynet (F) to SeaTalkhs (M) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide, C-Wide and E-Classic* MFDs to new generation RayNet multifunction displays.
*Note: The E-classic requires a "crossover" in the SThs data line, so this cable can only be used when connecting to the HS-5 Network Switch.
RayNet (M) to SThs (M)
A typical use for this adaptor cable would be to convert the new "RayNet(F)" Digital Radar cable to the "SThs (M)" connector, so that it can be plugged directly into the back of a legacy multifunction displays (such as an E-Classic* or C/E-Wide display).
*Note: The E-classic requires a "crossover" in the SThs data line, so this cable can only be used when connecting to the HS-5 Network Switch via a suitable length RayNet extension cable.
The new RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run.
The Cable Puller securely attaches to the twist-lock plug on RayNet (F) networking cables and provide a convenient, center-mounted attachment point for your pull string.
The cable puller also protects the connector's internal pins from damage, acts as a fairing to make pulls through tight spaces easier, and prevents crush/bend damage to the cable/connector joint. The cable pullers are reusable, and come in packages of 5 pullers.
![]() |
![]() |
|||||||||
SEATALKhs CABLES | ||||||||||
Part Number | A62245 | A62246 | E55049 | E55050 | E55051 | A62135 | E55052 | |||
Product | Cable | Adaptor Cable | ||||||||
Product Compatibillity | SeaTalkhs to SeaTalkhs | SeaTalkhs to RJ45 | ||||||||
Data | Ethernet | |||||||||
Length | 1.5m | 15m | 1.5m | 5m | 10m | 15m | 20m |
![]() |
![]() |
|||||||||
RJ45 PATCH CABLES | ||||||||||
Part Number | E06054 | E06055 | E06056 | A62136 | E06057 | R32140 | ||||
Product | Cable | |||||||||
Product Compatibillity | RJ45 to RJ45 Port | J45 to RJ45 Power over Ethernet Cable for T-Series PoE/JCU | ||||||||
Data | Ethernet | |||||||||
Length | 1.5m | 5m | 10m | 15m | 20m | 7.62m (25ft) |
![]() |
![]() |
![]() |
![]() |
|
ETHERNET SWITCHES AND ACCESSORIES | ||||
Part Number | E55060 | A80007 | R32142 | R32141 |
Product | Accessory | Product | Accessory | Product |
Product Compatibillity | RJ45 to RJ45 Crossover Coupler | HS5 RayNet Network Switch - 5 ports | RJ45 to RJ45 Waterproof Coupler (Supplied with the Thermal Cameras) | Power over Ethernet Injector. Thermal Cameras |
Data | Ethernet |
All the Digital Radar cables are listed below. We have the new "RayNet" Radar Cables, followed by the selection of available extension cables.
Finally we have the older "RJ45" radar cables, for those who need to interface to an RJ45 network switch or crossover coupler (etc).
![]() |
![]() |
![]() |
||||||||||
DIGTAL RADAR CABLES | ||||||||||||
Part Number | A80227 | A80228 | A80229 | A80230 | A92141D | A55080D | A55081D | A55076D | A55077D | A55078D | A55079D | |
Product | Radar Cable (RayNet) | Radar Extension Cable One Male and One Female radar connector on each end |
Radar Cable (RJ45) | |||||||||
Data | Ethernet & Power | |||||||||||
Length | 5m | 10m | 15m | 25m | 2.5m | 5m | 10m | 5m | 10m | 15m | 25m |
2018 © FLIR Systems All rights reserved. Privacy Policy|Copyright Policy|Terms of Use