This software update FAQ relates to the following products:

• SeaTalk 1 to ST^ng Converter

Stage 1: Populating the mSD Flash Memory Card with the MFD Software

1. Insert a compatible Flash memory card into the computer's memory card reader or into a memory card reader which has been interfaced to the computer.
2. Select the appropriate software download for your product from HERE
3. Upon completion of the download, click on the downloaded file to open it
4. Copy all files to the Root of the Flash card (Root is the first level you access when selecting the Flash). Make sure the files are not in any folders on the card
   (See video below for examples. Files will vary depending on update)


• For example: if your computer has assigned Removable Disk (E:) to your memory card reader/writer, then the software update files should be copied directly to Removable Disk (E:), not to any folders created on the memory card.


• Note: You are only opening the ZIP file that is downloaded. You cannot open the files contained in the ZIP file, these have extensions such as .dob .pkg .sh .sh.sig.iso with various file names. If you attempt to open these files you will see an error as they are designed to update your Raymarine products and not for use in a Windows, Apple or Linux PC.


5. Remove the memory card from the computer's memory card reader.

Please note these videos do not have audio

Stage 2: The update method

Updating the Product using a, c, e, eS or gS Series MFD's

1. Please make sure SeaTalkNG is connected to both the product to be upgraded, and the MASTER Multifuction Display (MFD), and that all are powered before starting the update procedure.
2. Place the mSD card with the ISO file product software into the Master MFD (while it is powered on)
3. If you are not presented with a pop-up box within a short period of time, then enter the following menu:
   1. From the Home Screen, press Set-Up>Maintenance>Check Card for updates
    
4. Follow the on screen instructions until you are presented with a table of connected products
5. Ensure that the product/s you wish to update are ticked (i.e. the ST1 to STng converter needs to be ticked)
6. Click on the Install now button located in teh bottom right corner of the screen.
7. MFD will show update % progress and eventually "Upgrade Complete" for the product/s
8. Once all products have completed, remove the mSD card from the MFD and Power Cycle the system.
9. Finally, please verify that all software is now up to date by going to the "checking the software versions..." section below:

Updating the Product with a Legacy display (A Series Classic, E Series Classic, C Series Wide, E Series Wide, G Series)

1. Power OFF the MFD.
2. Please make sure SeaTalkNG is connected to both the product to be upgraded, and the MASTER Multifunction Display (MFD), and that all are powered before starting the update procedure.
3. Insert the CF memory card containing the PKG product software update file, and the relevant Autorun file/s into the MFD’s memory card reader.
4. Power ON the MFD.
5. After the MFD has booted to its Raymarine Software Upgrade Utility screen, select the software upgrade package from the Upgrade Packages Available list.
6. Press the UPGRADE REMOTE UNIT function key.
7. Press the UPGRADE REMOTE UNIT ON ST2 (It may also say STNG depending on the current version of software you are using).
8. Use the Trackpad to highlight the unit you wish to update and press the UPGRADE UNIT softkey.
9. When the progress indicator's Overall bar reaches 100%, the Device's software will have been upgraded.
10. Remove the CF memory card from the MFD's memory card reader.
11. Power cycle the whole system.